SERVICE PHONE

13147811246 13147811216

Product

Current Location:Home-Product

Conventional Coatings

Release Date:2026-01-13 Page Views:130
Conventional Coatings

Coatings refer to a type of liquid or solid materials that can be applied to the surface of an object and form a film under certain conditions to provide protection, decoration, or other special functions (such as insulation, rust prevention, mildew prevention, heat resistance, etc.). In the early days, most coatings mainly used vegetable oils as raw materials, so they were also called paints. Now, synthetic resins have replaced vegetable oils, and thus they are called coatings. Coatings are not always in liquid form; powder coatings are a major category of coatings.
Water - based epoxy coatings
Not only do they retain the advantages of solvent - based epoxy coatings, such as good chemical resistance, adhesion, physical and mechanical properties, and electrical insulation, but they also feature low pollution, easy construction, low cost, and strong adhesion. By combining base resins, curing agents, modifiers, etc., various water - soluble epoxy primers, intermediate coats, and topcoats can be prepared, which have a very wide range of applications.

Technical characteristics

漆膜耐冲击

弯曲试验

光泽

硬度

表干/实干

划格试验

附着力

柔韧性

50 kg/cm2

3mm

56%

0.519

4h/24h

1级

1级

1mm

耐水性(240h)/耐盐雾性(300h)/耐湿热性(168h):不起泡,不剥落,不生锈,不开裂。


Acrylic polyurethane resin paint

It has good weather resistance, tough film, good gloss, and excellent abrasion resistance. The paint film can maintain excellent impact resistance and flexibility for a long time. It also has good chemical resistance, water resistance, and resistance to mineral oil, vegetable oil, petroleum solvents, and petroleum products. It is used for the surface coating of steel structures in large - scale outdoor projects, train carriages, docks, bridges, machine tools, instruments, electrical appliances, meters, color - steel houses, etc. The varieties include red oxide and gray - series primers, various - colored and metallic - colored enamel paints. Due to color limitations, it can also be used for orange - peel paint and hammer - tone paint.

Technical characteristics

漆膜耐冲击

鲜映性

光泽

硬度

表干/实干

划格试验

附着力

柔韧性

≥50 kg/cm2

≥0.6

≥95%

≥0.70

0.5h/48h

≤1级

1级

1mm

供货粘度90~110s(涂4#杯/25),固份≥60w%,>12个月干燥阴凉贮存

Fluorocarbon paint

This product features good adhesion, excellent physical and mechanical properties, outstanding stain resistance and chemical corrosion resistance. It has excellent light and color retention as well as outdoor durability. It is used for outdoor painting in medium - to - high corrosive environments. It is suitable for the surface painting of various steel structures such as those in marine, chemical, and humid - tropical atmospheric environments, highway guardrails, transformers, mechanical equipment, etc.

Technical characteristics

漆膜耐冲击

遮盖率

光泽

硬度

表干/实干

划格试验

附着力

柔韧性

50 kg/cm2

≥0.9

商定

≥F

2h/24h

≤1级

1级

1mm

耐碱(50g/L NaOH)168h无异常,耐湿热及耐盐雾(1000h)不起泡、不生锈、不脱落。


Organic silicone heat - resistant paintIt has excellent heat resistance and weather resistance, good water resistance and chemical resistance, strong adhesion, and good mechanical properties.
Main applications: Type I is suitable for various equipment parts that can withstand a high temperature of 300℃, such as large - scale boilers, high - temperature steam pipes, flue gas ducts, etc.; Type II is suitable for coating steel parts of equipment that need to withstand a high temperature of 500℃, such as engine casings, exhaust pipes, mufflers, ovens, stoves, etc.; Type III is suitable for special occasions where the temperature resistance needs to exceed 600℃.

Technical characteristics

漆膜耐冲击

遮盖率

表干/实干

划格试验

附着力

柔韧性

20 kg/cm2

40~140

Ⅰ、Ⅱ型2h/48h

Ⅲ型烘干2h

≤1级

≤2

3mm

耐水性24h。

Epoxy resin paint

Epoxy resin paint is a type of coating with epoxy resin as the main film - forming material. There are numerous varieties, each having its own characteristics. Classified by curing methods, there are self - drying single - component, two - component, and multi - component liquid epoxy coatings; baking single - component and two - component liquid coatings; powder coatings; and radiation - cured epoxy coatings. Classified by the state of the coating, there are solvent - based, solvent - free, and water - based epoxy coatings.

It has strong adhesion, excellent chemical resistance, anti - corrosion properties, water resistance, thermal stability, and electrical insulation. It is widely used in construction, chemical industry, automotive, shipbuilding, electrical insulation, etc. However, when exposed to outdoor sunlight, this paint will lose its luster and powder, so it is more suitable for use as a primer.

Epoxy zinc - rich paint  Technical characteristics

漆膜耐冲击

漆膜颜色及外观

表干/实干

耐盐水性

附着力

柔韧性

50 kg/cm2

灰色、平整光滑

2h/24h

一周不生锈

1级

1mm

锌粉易沉淀,使用前应搅拌后,再加固化剂充分搅拌,放置10分钟后使用。施工时应不断搅拌。配好的漆应在6小时内尽快用完。

Epoxy floor paint

Epoxy floor paint has the characteristics of resistance to strong acids and alkalis, abrasion, pressure, impact, mildew, water, dust, slip, as well as anti - static and anti - electromagnetic wave properties. It comes in a variety of bright colors and is easy to clean. It is widely used for surface coating in electronics factories, machinery manufacturing plants, hardware factories, pharmaceutical factories, automobile factories, hospitals, aviation and aerospace bases, laboratories, offices, supermarkets, paper mills, chemical plants, plastic processing plants, textile mills, tobacco factories, confectionery factories, wineries, beverage factories, meat processing plants, parking lots, etc.

Technical characteristics of epoxy floor paint

漆膜耐冲击

耐磨性(750g/500R,失重)

表干/实干

铅笔硬度

耐水性

附着力

柔韧性

50 kg/cm2

≤0.03g

4h/24h

2H

48h

1级

1mm

30%硫酸、耐40%氢氧化钠、耐汽油 120#、耐润滑油7天无变化。